Cliveurs pour fibres optiques à Large Diamètre
CT105+/106+/104+
Quand des clivages de haute qualité sont nécessaires pour les fibres jusqu’à1,250 μm, les nouveaux cliveurs CT105+/CT106+/CT104+ procurent toutes les options necessaires à vos besoins. L’écran LCD affiche les étapes du clivage,et les tailles d’inserts recommandés pour le coating et le cladding des fibres. La sauvegarde et le stockage des programmes sur PC ou tblette est possible via le port USB. Les nombreux paramètres des programmes du cliveur LDF garantissent des résultats optimaux.
Gamme de produits
| CT105+ | CT106+ | CT104+ | |
| Apparence | |  |  |
| Diamètre de cladding | 80 à 1250μm | 80 à 600μm | |
| Longueur de clivage | 5 à 40mm | ||
| Clivage angulaire | ー | ✔ | ー |
| Holders de fibre | Adaptateur pour holder de fibre (option) FH-100 | ||
Caractéristiques
Advanced Functions
Automated Clamp Force Optimization
– CT105+/106+ only –
To get good cleaving quality, the clamping force should be the minimum force that does not slip while the cleaver applies fiber tension. The optimal clamping force depends on optical fiber structure and coating material. The CT105+/106+ have a new technology that can find the optimal clamping force automatically and accurately. Also, it can reduce not only the fiber consuming during optimizing the clamping force, but also optimization time.
Long blade life
The New CB-06A blade material improvements have increased the blade life dramatically. CB-06A is compatible with previous, CT-105 series models.
Previous blade : CB-06
New blade : CB-06A
1,000 times cleaving
10,000 times cleaving
Blade edge after cleaving 250um fiber
*Blade life depends on the cladding properties of the fiber being cleaved
Useful functions
Micrometer backstop
Micrometer backstop can improve cleave quality especially for large-diameter fibers and for applying lower tension fibers. CT105+ series is equipped with a micrometer backstop as a standard feature.
Fiber holder adapter – OPTION –
Fiber holder adapter, AD-CT105-FH100, supports the transfer of fiber from the cleaver to the fusion splicer smoothly without removing the fiber from the fiber holder system. Applicable Fiber Holder : FH-100-xxx series for FSM-100 series.
Angle cleave – CT106+ only –
CT106+ achieves angled cleaves by applying torsion with a rotating right clamping stage in accordance with the target angle. Angled cleaving range is from 0 to 15 degrees and possible with fibers up to 800µm.
Insert Option Guide
The standard items for the CT105+ series DO NOT include upper and lower inserts for clamping fibers. Referring to the below size table, please order both upper and lower inserts together.
How to select the appropriate size
The number in the table shows the applicable diameter [µm] of cladding or coating. It is necessary to select the insert size based on fibers diameters. At first, try the navy colored cell sizes.
Case1: Cleaving coating stripped fiber
Refer to coating diameter
Refer to cladding diameter
Case2: Cleaving glass rod
Refer to cladding diameter
Refer to cladding diameter
