Clad Alignment Fusion Splicer
The Fujikura 41S is an Active V-groove splicer. By using Bluetooth technology, the 41S wirelessly connects to the CT50 fiber cleaver and enables a range of pioneering features that will improve the overall installation time, cost and efficiency for operators.
Active V-groove Splicing
Active V-groove align both fiber cladding axis precisely and makes low splicing loss constantly.
After V-groove alignment
Active Blade Management Technology
1. Automatic Blade Rotation
The 41S fusion splicer and CT50 ﬁber cleaver have wireless data connectivity. This capability allows automatic cleaver blade rotation when the splicer judges the blade is worn.
2. Blade Life Management
The 41S fusion splicer indicates the remaining blade life and also informs the user when a blade height change is required.
1. Easy Fiber Protection Sleeve Positioning
The shape of the sheath clamp is optimized for the 60mm length protection sleeve. The length from splice point to the edge of the sheath clamp is 30mm. Therefore, it is easy to center the protection sleeve over the splice by using your finger as the reference splice point.
2. New Concept Electrodes
The 41S electrodes comes as an “assy” including the fixing screw. You can also rotate the screw by hand without tools. It enables easy electrode replacement.
Loosen the screw
Tighten the screw
Remove the old electrode
Install the new electrode
3. Universal Tube Heater
The 41S fusion splicer can accommodate a max 6.0mm diameter heat sleeve before shrinking. As a result, it supports a wide range of protection sleeve sizes.
4. Work Tray
The work tray can transform into several shapes according to your optical installation style.
5. Easy Maintenance
The CT50 fiber cleaver has a user replaceable blade and rubber clamps – there’s no need to send the device to a service center for blade or clamp replacement.
User replaceable rubber clamps
User replaceable cleaver blade