Optical Fiber Cleaver
The CT52 also allows for a reduced cleave length of 8 mm on 900 μm jacketed fibers and as short as 3 mm on 250 μm and 400 μm coated fibers.
The CT58 cleaver is designed for cleaving silica fibers with 80 μm cladding.
|Cleave Length with FH-100||3 to 10mm|
|3 to 10mm|
Active Blade Management Technology
1. Automatic Blade Rotation
The fusion splicer and CT52/58 ﬁber cleaver have wireless data connectivity. This capability allows automatic cleaver blade rotation when the splicer judges the blade is worn.
2. Blade Life Management
The fusion splicer indicates the remaining blade life and also informs the user when a blade height change is required.
1. Easy Maintenance
The CT52/58 ﬁber cleaver has a user replaceable blade and rubber clamps, so there’s no need to send the device to a service center for blade or clamp replacement.
User replaceable rubber clamps
User replaceable cleaver blade
2. EASY ACCESS & Longer Stripped Fibers
The CT52/58 li opens 100 degrees to offer easy access and can accommodate longer stripped fibers than previous models
3. Single Action Operation
The CT52/58 cleaves and collects the fiber scrap with a single press action.
|Fiber type||Single mode optical fiber|
|Multi mode optical fiber|
|Fiber count||Single fiber||Single fiber|
|Cladding dia.||Approx. 125μm||Approx. 80μm|
|Fiber setting plate|
AD-10-M24 : Max. 900µm coating diameter
AD-50 : Max. 3mm coating diameter
|Fiber setting plate is not applicable.|
|Fiber holder||Coating shape. : Refer to splicer options|
|Cleave length||Fiber holder||Approx. 8 to 10mm, Standard 9mm|
|Cleave angle *1||Single fiber||Avg. 0.3 to 0.9 degrees|
|Blade life *2||Approx. 60000 fiber cleaves|
|Physical description||Dimensions W||Approx. 119mm without projection *3||Approx. 78mm without projection *3|
|Dimensions D||Approx. 94mm without projection *3||Approx. 94mm without projection *3|
|Dimensions H||Approx. 59mm without projection *3||Approx. 59mm without projection *3|
including battery and AD-10-M24
including battery and AD-10-M24
|Temperature||Operate : 0 to 50 degreeC||Operate : -10 to 50 degreeC|
|Storage : -40 to 80 degreeC|
|Humidity||Operate : 0 to 95%RH non-condensing|
|Storage : 0 to 95%RH non-condensing|
|Battery||2 pieces of LR03, AAA dry battery|
|Wireless interface *4||Bluetooth 4.1 LE|
|Screw hole for tripod||1/4-20UNC|
|Blade rotation||Motorized rotation|
|Manual rotation dial|
*1:Measured with an interferometer at room temperature, not with a splicer. A new blade was used to cleave the single fibers. The average cleave angle changes depending on the environmental conditions, blade condition, operating method, and cleanliness.
*2:The blade life changes depending on the environmental conditions, operating method, and the fiber type cleaved.
*3:Measured in a condition when closing the lever.
*4:Bluetooth® mark and logos are the registered trademarks of Bluetooth SIG, Inc.
|Optical Fiber Cleaver||CT52 or CT58||1pc|
|Fiber Scrap Collector||FDB-05||―||1pc|
|Fiber Setting Plate||AD-10-M24|
|―||Optional fiber setting plate|
|Blade||CB-08||Blade for replacement|
|Clamp Arm||ARM-CT52-01||ARM-CT58-01||Clamp arm with anvil for replacement|
|Fiber Scrap Collector||FDB-05||―||Spare scrap collector|
|Side cover||SC-CT50-01||Side cover instead of scrap collector|
|Spacer||SPA-CT08-10||Cleave length 10mm|
|SPA-CT08-09||Cleave length 9mm|
|SPA-CT08-08||Cleave length 8mm|