Fusion Splicer Related Products
製品画像

Ribbon Fiber Stripper
RS02/03/03-80

The RS02/03/03-80 is designed and developed with emphasis on operability and usability where less force is required for the stripping process. By using an optional spacer, a short lead (3 mm to 5 mm) is also possible. Fiber holder is compatible with FH-100 series. Furthermore, equipped with new features such as large capacity battery for 600 stripping cycles, 6 times larger
than conventional stripper, and wireless link with smartphones for operational parameters adjustment.

Product Variation

 ModelRS02RS03RS03-80
Cladding diameter125μm
80μm
Coating diameter200 to 400μm
100 to 150μm
Battery OperationNot availableAvailable

Features

User Friendly

1. Lower Stripping Force

The RS series ribbon stripper has an ergonomic design and requires lower stripping force than the previous stripper.

Ergonomic Design

Previous Model

RS03

Stripping Force

2. Stripping Condition Control

When the user changes the splice mode, e.g. from 12 fiber ribbon splice mode to SWR fiber splice mode, the RS series ribbon stripper automatically changes its heating temperature and time with a wireless command from the splicer.

Heat temperature changes in accordance with Splice mode

3. Universal Ribbon Stripper for RS02/03

The RS series ribbon strippers are compatible with 200 µm to 400µm coated fibers without replacing the stripper blades.

Available thickness range

4. Battery Capacity  for RS03

The RS03 equips the high capacity battery that is available for 600 stripping cycles*.

*Tested at room temperature with a non-degraded battery and Eco-mode turned on. The number of cycles changes depending on the environmental conditions, stripper settings, and battery condition.